含有章节索引的中文 文章模板
-- hd [DateTime(2004-08-09T00:35:03Z)] TableOfContents
FreeBSD ADSL 安装 Howto
简述
FreeBSD ADSL 安装Go!Go!Go!
1.配置网络连接
配置ppp.conf
先登录系统,这样: Login: root (以Root用户登录) Password: (输入你的密码,因安全问题,这里你看不到输入的结果.) 由于是ADSL上网,配置文件是 /etc/ppp下的 ppp.conf,在 /etc/ppp 下可能已经有了 ppp.conf 也可能只有 ppp.conf.sample ,总之,我放弃使用现有的ppp.conf 从ppp.conf.sample新建一个.你可以这样做: # rm ppp.conf (删除ppp.conf , 如果有的话) # cp ppp.conf.sample ppp.conf # ee ppp.conf (随自己喜好,使用 ee 或 vi ) 这里把我的ppp.conf 附上,以此为范本.
# PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by [email protected] # # See /usr/share/examples/ppp/ for some examples # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
default:
- set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) # Ensure that "device" references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) #
set device PPPoE:lnc0 set speed sync set mru 1492 set mtu 1492 set ctsrts off set timeout 30 # 3 minute idle timer (the default) disable lqr deny lqr add default HISADDR enable dns # request DNS info (for resolv.conf)
hz163: # 注意:这里的hz163是你的ISP名,要比下面的set语句多出一点(一个空格).
- set authname user(把这里的user换成你的ADSL用户名) set authkey password (把这里的password换成你的ADSL密码) set dial set login set ifaddr 10.0.0.1/0 10.0.0.2/0 nat enable yes
连接网络
配置好了ppp.conf,你就成功了一半,接下来的就是输入命令、连接网络喽! #ppp –ddial hz163 之后看看连接状态。 #ifconfig 我的结果: lnc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::20c:29ff:fe98:25a6%lnc0 prefixlen 64 scopeid 0x1 ether 00:0c:29:98:25:a6 lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
- inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 inet 218.72.106.94 --> 61.174.64.21 netmask 0xffffffff
- Opened by PID 54
数字部分就是:ISP分的IP地址 -> ISP的DNS服务器的IP. 这样你就上了网啦!
配置rc.conf使ADSL开机上网
想一开机就上网?简单!让我们来配置 /etc/rc.conf吧,这很简单! 就填上这几句: ifconfig_lnc0="192.168.0.254/24" defaultrouter="192.168.0.254" inetd_enable="yes" gateway_enable="yes" ppp_enable="yes" ppp_mode="ddial" ppp_nat="yes" ppp_profile="hz163" named_enable="yes" 这几句就把FreeBSD虚拟机配置成了一NAT网关,兼软路由、BIND8名字服务器。